UVAS plus sc UV Sonde für organische Belastungen, 1 mm

UVAS plus sc UV Sonde für organische Belastungen, 1 mm
Artikel-Nr.: LXV418.99.10001
Einzelpreis Kontakt
Lieferung innerhalb 1 Woche

Ohne Probennahme und Probenaufbereitung

Use the Hach® UVAS plus sc UV Absorbance/Transmittance sensor to continuously protect plant treatment processes from high influent organic loads.

Verzögerungsfrei

Activated sludge processes require precise balancing of organic load, aeration, and nutrients. Continuous trending of the organics using the UVAS plus sc sensor can help operators know how to balance other factors resulting in cost and time savings.

Ohne Reagenzien

The combination of two Hach UVAS plus sc sensors allows continuous monitoring of micropollutants reduction in advanced treatment stages.

Selbstreinigende Sonde

The detector windows are automatically cleaned by a built-in wiper that eliminates surface films or particles that can diminish accuracy.

Sehr hohe Verfügbarkeit der Messwerte

Hach’s UVAS plus sc is designed to provide continuous UV light transmittance (UVT) measurement of pre-disinfected source water. Operational costs related to sampling for UVT may be reduced with continuous on-line measurement.

Inhalt

UVAS plus sc Sonde, Bedienungsanleitung

Technische Daten

Abmessungen: 70 x 333 mm (2.75 x 13.11 in.) approximate
Anwendung: Belebungsbecken
Benutzer-Wartung: 1 h / month, typical
Betriebsbedingungen: 2 - 40°C (35.6 - 104°F)
Configurations: Sensor only
Control: Control Function: PID, time control, 2-point controller (with sc controller)
Controller: Nur Sonde
Druckbereich: ≤ 0,5 bar
Durchflussrate: n/a
Durchmesser: 70 mm
Gewährleistung: 24 Monate
Gewicht: 3,6 kg
Inhalt: UVAS plus sc Sonde, Bedienungsanleitung
Inspektionsintervall: 6 Monate
Kabellänge: 10 m Kabel fest am Sensor montiert
Kompensation: 550 nm
Länge: 333 mm
Material: Sensorgehäuse: Edelstahl 316, 1.4571, einfach versiegelt
Wischerachse: Edelstahl 1.4104
Kabelverschraubung: Edelstahl 1.4305
Dichtung Kabelverschraubung: PVDF
Profilträger: Edelstahl 1.4310
Wischerarm: Edelstahl 1.4581
Wischerprofil: Silikon
Messfenster: Suprasil (Quarzglas)
Messbereich: SAK254: 2 - 3000 m-1
Kann je nach Anwendung auf andere Parameter kalibriert werden (z,B, TOC, CSB, BSB)
Messintervall: ≥ 1 min
Messmethode: UV Absorptionsmessung
(einzigartiges 2-Strahl-Verfahren)
SAK254 nach DIN 38404 C3
Optische Pfadlänge: 1, 2, 5 and 50 mm
Parameter: SAK
pH Bereich: 4.5 - 9 pH
Verbindungen: n/a
Wartungs-Vorgaben: 1 h/Monat bei Standard-Anwendungen